1. Individually addressable rgb pixel led strip
2. DC5V , 7.2W/m
3. 10mm wide White / Black PCB
4. 2pin / 3pin JST-SM connector
5. 3M adhensive tape on back side of non-waterproof strip
6. Support SD card controller,Arduino,Glediator,DMX512,Artnet, MADRIX NEBULA to control
7. Widely used in entertainment, stage, live performance,et
WS2812B SK6812 60 leds pixel tape
1. These addressable WS2812B SK6812 60 leds pixel tape are incredibly cool that each led is powered by a sk6812/ws2812b led that enables them to be individually addressable. In a word, it is standard 1 LED & 1 IC per copper unit.
2. Ws2811 IC is built into the smd5050 LED chip making for less surface mount components and a more reliable strip light.
3. Multiple meters WS2812B SK6812 60 leds pixel tape can be connected together via 3pin JST-SM connector. Then you can make video, display, chasing effects and other patterns.
4. Addressable rgb led pixel strip sk6812 ws2812b is flexible , bright, durable and easy for installation.
For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip, there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.
5. If WS2812B SK6812 60 leds pixel tape does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.
|Light source||Epistar ws2812b (sk6812)LED|
|Beam angle||140 deg.|
|Entire piece LED quantity||60pcs|
|PCB board thickness||10mm wide, 0.25mm thickness|
|Current||50mA at 5 V with full brightness|