1. RF Remote control, with long distance,wire connection is simple and very easy to use.
2. Support almost all kinds of single data and double data IC led tapes.(Can be customized)
3. 300 kinds of variations, covering the effects of the market for all Symphony controller mode, you can program any combination of 16 and automatically play
4. Maximum number of control points: 2048 points
5. Remote control distance: 30 meters (14-key multi-function RF remote control)
Before decide to get this mini RF controller, make sure which kind of led pixel tapes you will use.
Like SK6812 led tapes mini RF controller couldn’t work with SK6812 RGBW LED tapes
1. Functions Of Each Button:
|ON/OFF||ON or OFF|
|MODE+||Switching patterns forwardly|
|MODE-||Switching patterns backwardly|
|SPEED+||Switching speed forwardly|
|SPEED-||Switching speed backwardly|
|AUTO||Run internal patterns automatically|
|NUM+||Add the number of pixels on each section|
|NUM-||Decreased the number of pixels on each section|
|SEC+||Add number of section.|
|SEC-||Decreased number of section.|
|MATCH||Match the Remote control with the receiving controller|
2. Testing and Matching:
Pressing and hold the AUTO button for up to 3 seconds until LED is out, release the AUTO button to into the mode of switching in red,green,blue,yellow,purple,cyan and white,witch to test the your LED.
Pressing and hold the MATCH button for up to 3 seconds to match the Remote control with the receiving controller. Pressing and hold the MATCH button for up to 3 seconds to un-match.
Some of the patterns run in several sections, each section is the same. User can make the number of sections as follow: 5, 10, 15, 20, 25, 30,35. Pixel number of each section can be chosen as follow: 20, 30, 40, 50, 60, 70 .
Sum of pixels = Sections*Number per section
4. User Setting Saving:
User’s each pressing on the button can be saved by the controller automatically. When the controller is power off, next time power up, it will work the way as the same as before.
3. Receiving Controller：
Can be customized to support almost every kind of one-wire or two-wire LED-DRIVER-IC.User can specify to support which IC before our delivery,and also,user can modify the status of R5,R6,R7,R8 on the PCB to meet their needs:
|Actions||To support IC|
|Short none of R5,R6,R7,R8||WS2811|
The receiver controller has two kinds of working voltage :5V-supply-voltage and 12V-supply-voltage.
Cautions: Please make sure the power supply voltage is match to your controller before you power it.